Detailing your Boat
Boats are incredibly useful additions to our lives as they allow us to explore some of the most peaceful parts of the world on the open water and they encourage relaxation. After a period of time and use, however, your boat will more than likely start to look a bit dirty as contaminants from the water and dirt particles from the air start to collect on the boat's surface and the interior. When this happens, it is generally time to get to work detailing your boat with the aim of bringing it back to its former glory. In the following guide, you will learn each of the steps required to take in order to get your boat in great condition aesthetically. You'll see the importance of simple things like proper vinyl protection, a quality fabric protection, and how Performance Protectants and Cleaners are the solutions to keeping your boat like new.
Start With A Rinse
The first step to detailing your boat should always be to give it a healthy spray of clean water to remove any loose debris or grime from the surface. Start from the top of your boat and work your way down until you reach the bottom. This is just to remove the loose bits that are on the surface of the boat, this will not give it a complete clean. A good hose nozzle works here, but a pressure washer would be an added bonus.
Soap It Up
Once you have removed the loose pieces of debris and grimes, it is time to get to work on the more stubborn dirt on the boat's surface. Using a specialized boat cleaner, such as 303 Boat Wash, get to work lathering the outside of the boat to agitate the grime. You should never allow the soap to dry onto the surface of the boat as you run the risk of doing damage to the finish and leaving horrible streaks. You should do small areas at a time, rinsing the soap off as you go before moving onto the next spot. You will be applying protective treatments later, but the quality of that protection relies on how good your cleaning preparation beforehand is. The 303 Marine Multi-Surface Cleaner is safe on all parts of your boat including; Vinyl, Fabric, and Gelcoat.
After a good boat cleaning, the outside surface of your boat should be looking much better, although slightly dull compared to when you bought it. To bring back the shine, you should get to work and buff out the exterior surface by hand or with a rotary buffer to remove oxidation and prepare the surface of the boat for the waxing stage of the detailing process.
Wax On, Wax Off
To really add that showroom shine to your boat, you absolutely have to apply wax to its surface. Not only does the wax shine up the surface to make it more attractive, boat waxing also protects the surface against debris and grime, meaning you will be required to detail it less often. Just like if you were waxing your car, you should only concentrate on small areas at a time, buffing off the wax as you go until the outside of your boat is gleaming in its pristine condition. It is worth noting that specialized boat wax works much better than others you may purchase. This is because the boat wax is specially formulated to deal with the increased contact with water that a boat experiences compared to a car. To maintain that just waxed shine you can use 303 Speed Detailer in-between waxes to restore shine as well as add that all important UV protection.
Once the outside of the boat has been fully cleaned and waxed, it is time to get to work on the boat interior. As with the outside of the boat 303 Marine and Recreation Multi-Surface Cleaner is perfect for most cleaning jobs inside the boat as it is strong enough to clean stubborn spots, but gentle enough as to not damage the surfaces. For more suborn stains and marks, the 303 Spot Cleaner can be used. For the details, such as aluminum poles, you can use a specialized metal polish to clean them, then you can use the same wax used on the outside of the boat to protect them.
Once your boat is all clean and waxed it is time to think about maintaining that just detailed look as well as keeping your boat's surfaces looking new. Boats are out in the sun all the time and it is necessary to protect your surfaces from harmful UV rays. Vinyl, Rubber, and plastics should get a coat of 303 Marine Aerospace Protectant, while all of your gel coat can be wiped down with 303 Marine Speed Detailer. Finally, any fabrics should receive a treatment of 303 Marine Fabric Guard to keep them from absorbing water and mildew build up. These simple tips and tricks will keep your boat looking new for years to come.